Autobahn Victory Red Basecoat Auto Paint GALLON Size GM Code WA9260/High Teck

Autobahn Victory Red Basecoat Auto Paint - Gallon Size (GM Code WA9260)

Product Overview: Revitalize your GM vehicle with this premium Autobahn Victory Red Basecoat Auto Paint in a generous gallon size. Perfectly matched to GM color code WA9260 (also known as Victory Red), this high-quality basecoat delivers a vibrant, factory-like red finish that's ideal for touch-ups, full resprays, or custom projects. Whether you're restoring a classic Chevy Camaro, Corvette, or any compatible GM model from the mid-2000s onward (like 2005-2013 Corvettes or various Pontiacs and Buicks), this paint ensures seamless color matching and professional results. Formulated for durability and easy application, it's a favorite among DIY enthusiasts and professional body shops alike.

Key Features:

• Color Accuracy: Exact match to GM OEM code WA9260 Victory Red – no guesswork needed!
• Size: 1 Gallon (128 oz) of basecoat paint, yielding approximately 2 gallons of sprayable material when mixed 1:1 with reducer (reducer not included)
• High-Quality Formula: Solvent-based urethane basecoat for superior adhesion, fade resistance, and gloss retention. Provides excellent coverage and hides imperfections.
• Compatibility: Designed for automotive use on metal, plastic, and fiberglass surfaces. Works best over properly prepared primers or existing paint.
• Brand: Autobahn – known for affordable, reliable automotive refinishing products.
• Coverage: Typically covers 100-150 sq ft per gallon (depending on application method and coats).
• Drying Time: Flash time between coats: 5-10 minutes; ready for clearcoat in 30-60 minutes.

This basecoat requires a clearcoat top layer (not included) for UV protection and shine – we recommend a high-gloss urethane clear like Autobahn, Platinum, or similar brands for best results.

What's Included:

• 1 Gallon of Autobahn Victory Red Basecoat Paint (GM WA9260). (Note: This listing is for basecoat only. Reducer, hardener, clearcoat, and application tools sold separately. Contact us for kit recommendations!)

Application Instructions: Achieving a flawless finish requires proper preparation and technique. Follow these step-by-step instructions for best results. Always work in a well-ventilated area, wear protective gear (respirator, gloves, goggles), and test on a small area first.

1. Surface Preparation:
   • Clean the surface thoroughly with soap and water, then degrease using a wax and grease remover.
   • Sand the area with 400-600 grit sandpaper to create a smooth base. For bare metal or major repairs, apply a primer (e.g., epoxy or self-etching primer) and sand to 600 grit.
   • Mask off surrounding areas with tape and paper to prevent overspray.
2. Mixing the Paint:
   • Shake or stir the basecoat gallon well for 5-10 minutes.
   • Mix 1:1 ratio with a compatible medium reducer (thinner) for optimal spray viscosity. For example: 1 part basecoat to 1 part reducer. No hardener is needed for basecoat.
   • Strain the mixture through a paint filter to remove any clumps. Use within 24 hours once mixed.
3. Application:
   • Use a spray gun with a 1.3-1.5 mm tip (HVLP recommended for efficiency and less overspray).
   • Apply 2-3 light to medium coats, allowing 5-10 minutes flash time between each. Hold the gun 6-8 inches from the surface and move in even, overlapping strokes.
   • Aim for 50% overlap on each pass to avoid streaks. Temperature should be 70-80°F with low humidity for best flow.
   • Total dry film thickness: 1-2 mils.
4. Drying and Topcoating:
   • Allow the final coat to flash dry for 30-60 minutes (tack-free but not fully cured).
   • Apply clearcoat within 24 hours for best adhesion. Follow your clearcoat's instructions (typically 2-3 coats with flash times).
   • Full cure: 24-48 hours at room temperature; sanding and buffing can be done after 7 days.

Safety and Handling Tips:

• Ventilation: Use in a spray booth or well-ventilated space to avoid inhaling fumes.
• Protective Gear: Always wear an NIOSH-approved respirator, nitrile gloves, safety glasses, and coveralls.
• Storage: Store in a cool, dry place away from heat or flames. Shelf life: 1-2 years unopened.
• Disposal: Dispose of leftovers and containers per local hazardous waste regulations.
• Warnings: Flammable liquid – keep away from sparks, open flames, and children. If swallowed or inhaled, seek medical attention immediately. Not for household use.

Why Buy From Us?

• Fast shipping from the USA.
• 100% satisfaction guarantee – returns accepted within 30 days.
• Questions? Message us for color matching advice or custom kits!

Transform your ride with authentic Victory Red shine.